The HDD in the second slot will be used as a clone backup. And if so, will it always apply regardless of the version of OS X and recovery partition installed?
This whole ordeal has been way more trouble than it was worth. Great questions! Updating the OS should update your recovery partition. I would however recommend to follow the instructions in the article just in case. When upgrading a drive or changing out a drive in a MacMini it will be best to follow these instructions to ensure that there will be no data loss.
It will not matter what bay the SSD is in. Hi, Marcel. The Mac mini is compatible with macOS Sierra. If you have any further questions, feel free to contact our helpful customer service team! There was no suggestion that it wanted to try Fusion on them. I have done this as well: Samsung EVO in lower drive bay original hdd location and Seagate 2tb in the other bay.
Kept them as separate drives.
Is anyone running Sierra smoothly with third party disks? Or is this a new level of proprietary tyranny from Apple? Is there a version number of the Disk Utility app we can just check to know if it is the version that will try and repair a new install thinking the two drives are one fusion drive? Once opened you will be able to see what OS you are currently running!
If you have any further questions, please contact our Technical Support Team! I installed the two-drive upgrade without any major issue. It was not a quick job by any means but OK if you have the right tools and are patient. One note — a couple of the screws labeled as T-8 are actually T-9 the ones attaching the drive to the antenna grate. No drama. Then I migrated my data from the backup copy.
So I reconfigured the drives, eliminating the Fusion lvg and reformatting as two separate drives. This is now working very nicely.
I looked at the installation videos. The videos are great though because it shows exactly how the sequence proceeds. For the Mini, the SSD is a standard format 2. Later models are different, but the is an easy upgrade.
Page 1 of 2. Alternatives for Mac users include running Linux or Windows virtualized, or installing third-party Unix packages via open source package managers such as Conda, Fink, Homebrew, MacPorts, Nix, pkgsrc, and Rudix . Please be aware that this is a moderately challenging install. Slot-in Combo drive or SuperDrive. While the mini is designed to be able to take a 2nd internal 2. All I get at start up is a blinking folder with a question mark in it.
All the cables and screws are already there. You just need to move them from the old drives to the new ones. Earlier models, such as Mini, had some but these are external and can be transferred.
You can peel these off by gently lifting on the sides and then reapply to the new drives. For the Mini, the temperature sensors are attached to these plastic sheets. For the there are no sensors.
This is easier if you tip the mini onto its front face the one opposite all the connectors so that the drive goes in vertically. Slip a business card underneath it when you re-seat the motherboard — this will help get the screws from the antenna grate to go in properly.
But you still need to pull the motherboard out a bit to get clearance for the drive to come out. I placed the new drives in the same configuration.
I finally solved it by switching the 2 drives position, and voila it works amazingly. I hope this helps someone! OS X I guess that the new system will be a Fusion drive, but either way is fine from my viewpoint. If I understand the very helpful comments and suggestions correctly, I should install the SSD in the upper slot deepest into the Mini, working from the bottom and the HDD closer to the antenna grate.
Or are the existing items suitable? Q: after installation, do I just boot into recovery to format the drives and create a Fusion drive? Is anything else needed? Is it better if I format the two drives first? Or should I not do that? Depending on where the original drive is located will determine what kit you will need.
When you have installed both drives into your MacMini, you will need to manually create the new fusion. Follow-up answer to my earlier question. Data Doubler is NOT required. This worked for me because I have lots of music and put all that on HDD. Everything else is on SSD. Curious if anyone has tried doing a fusion drive? I am guessing that most of us would prefer to know what is where rather than letting OSX manage things? Trying to decide what to do with it all. No data of any value as this is just an htpc.
It was a nightmare trying to do a clean install or an internet restore. Ended up doing a restore from the main drive as this was the only thing that worked. The boot up process was a fast as advertised. But after 10 minutes of using it and opening several apps noticed that the system became very slow, unreliable and the multicolor ball of doom started to appear a lot, taking longer than usual for an app to open.
Read a lot on the internet about similar problems, but nothing sims to fit what I am experimenting with my mini. The SSD firmware is up to date. Repair permissions. How much memory is installed, is it all recognized in system report?
Run a disk speed test many free ones in internet Does system report see the MercuryPro at 6GB link speed? Mini i5 with Yosemite and 16 megs of memory. Did all you mentioned several times. But every time the same thing happen. Boot up fast, start working fine, but after several apps openings and between 10 and 20 minutes the ball of doom appears taking more than usual to open, close or move between apps.
Do a shut down, restart and the same thing happen. After enabling it all the problems were solved. Now I get all the speed of the SSD without the ball of doom appearing every time and slowing all apps. Maybe this will help other with the same problems. Is it necessary to upgrade that to Mavericks, or may Question 1 is answered. Thanks in advance.
But in reality it will only recreated if you format the drive, then install to it. If you are looking to run the drives individually and you have successfully installed and formatted the new SSD, all you will need to do is upgrade directly to Yosemite. You do not have to upgrade form X to All data is stored on the HDD. Do I need to change any settings in TM, e. Currently, I turned TM off.